BJCQH - BLACK WRINKLE ENAMEL, M105
- MSDS: BJCQH
- Manufacturer: CROWN PAINT COMPANY
- Product Name: BLACK WRINKLE ENAMEL, M105
- National Stock Number: 8010-00-530-8380
Product Identification
Product ID:BLACK WRINKLE ENAMEL, M105
MSDS Date:09/16/1986
FSC:8010
NIIN:00-530-8380
MSDS Number: BJCQH
Responsible Party
OKLAHOMA CITY, OK 73117
Emergency Phone: (405) 232-8580
Info Phone: (405) 232-8580
Cage: OG5U8
Contractor
Telephone: (105) 232-8580
Cage: OG5U8
Ingredients
VM&P NAPHTHA (LIGROINE)
CAS: 8032-32-4
RTECS: OI6180000
Fraction By Weight: 33.3%
OSHA PEL 300 PPM/400 STEL
ACGIH TLV: 300 PPM; 9192
TOLUENE (SARA III)
CAS: 108-88-3
RTECS: XS5250000
Fraction By Weight: 17.0%
OSHA PEL 200 PPM/150 STEL
ACGIH TLV: 50 PPM; 9293
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
ALCOHOL
Fraction By Weight: 1.0%
ACGIH TLV: 400 PPM
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN/EYES: PRIMARY IRRITATION.
INHALATION: NERVOUS SYSTEM DEPRESSION, HEADACHE, DIZZINESS,
STAGGERING GAIT, CONFUSION, UNCONSCIOUSNESS, COMA. INGESTION:
HARMFUL/FATAL.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:SKIN/EYES: PRIMARY IRRITATION. INHALATION:
NERVOUS SYTEM DEPRESSION, HEADACHE, DIZZINESS, STAGGERING GAIT,
CONFUSION, UNCONSCIOUSNESS, COMA. INGESTION: HARMFUL/FATAL.
OVEREXPOSURE HAS BEEN SUGGESTED A S A CAUSE OF THE FOLLOWING IN
HUMANS: LIVER ABNORMALITIES.
First Aid
First Aid:EYE/SKIN: FLUSH W/WATER FOR AT LEAST 15 MINS. GET MEDICAL
ATTENTION. INHALATION: REMOVE FROM EXPOSURE RESTORE BREATHING.
INGESTION: DON'T INDUCE VOMITING. CALL PHYSICIAN.
Fire Fighting
Flash Point:55F
Lower Limits:1.2%
Extinguishing Media:FOAM, CO2
Fire Fighting Procedures:WATER MAY BE INEFFECTIVE. WATER SPRAY MAY BE
USED TO COOL CONTAINERS. USE FOG NOZZLES IF WATER IS USED.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE IF EXPOSED
TO EXTREME HEAT.
Accidental Release
Spill Release Procedures:ABSORB SPILL ON PAPER VERMICULITE FLOOR
ABSORBENT, OR OTHER ABSORBENT MATERIAL.
Handling
Handling and Storage Precautions:EMPTY CONTAINERS MAY BE HAZARDOUS WHEN
EMPTIED, GROUND CONTAINERS IN EXPLOSIVE ATMOSPHERE WHEN POURING
LIQUID.
Other Precautions:FLAMMABLE LIQUID DON'T USE NEAR SPARKS, HEAT OR OPEN
FLAME.
Exposure Controls
Respiratory Protection:IF TLV IS EXCEEDED, WEAR APPROVED SELF CONTAINED
BREATHING APPARATUS W/FULL FACE PIECE OPERATED IN PRESSURE DEMAND
OR OTHER POSITIVE PRESSURE MODE IS ADVISED.
Ventilation:SUPPLY SUFFICIENT MECHANICAL/LOCAL EXHAUST VENTILATION TO
KEEP
Eye Protection:CHEMICAL SPLASH GOGGLES, SAFETY GLASSES
Other Protective Equipment:IMPERVIOUS CLOTHING/BOOTS
Supplemental Safety and Health
WT/GAL: 8.0
Chemical Properties
Boiling Pt:B.P. Text:277-290F
Vapor Density:>AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:51.3%
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS
Stability Condition to Avoid:SPARKS, HEAT, FLAME
Disposal
Waste Disposal Methods:DESTROY BY LIQUID INCINERATION OR TOXIC
SUBSTANCE LANDFILL.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.